Marmitek X10 Lamp Module & Dimmer with Transmitter LWM1 (Micro M
[LWM1]

£77.16
(£67.1 ex. VAT)

Features

Availability:
In stock ready to dispatch

Local control via the switch attached to the module or remote control using Marmitek X-10.
Built-in dimmer, 120W.
Two-way X-10: transmits the set dimmer level to other LWM1, LD11, LW12 and LW11 modules (set to the same HouseCode and UnitCode).
Softstart and softdim.
Memory function for last dimmer setting.
Responds to ON, OFF, DIM, BRIGHT and extended X-10(dimmer setting originates from other LWM1 modules).
Can respond to All Lights On and All Off (configuration).
Choice between 1-way momentary switch or 2-way momentary switch.

For further information about Marmitek Micro Modules click on Marmitek comparison table

Availability:
In stock ready to dispatch

Power:	230V - 50Hz.
Capacity:	250W/230V with temperature and mounting restrictions. 120W/230V light bulbs. 100W Low voltage halogen lighting with wound voltage transformer. 120W Low voltage halogen lighting with electronic voltage transformer. (recommended voltage transformer: Osram HTM series. If you use other voltage transformers, we advise you to test the combination before building in the system). Softstart/Softdim. Memory reading for dim level
X-10 Key codes:	All units Off, All Lights On, On, Off, Dim, Bright, Extended Code 1 type 3, Pre-Set Dim, Status Request.
X-10 transmisson:	1 pulse on 0° and 180°.
Switch use:	1 or 2 way momentary switch.
Connection reach:	Till 2.5 mm2
Fuse:	Radial lead micro fuse, 1.6AT, 250V.
Environment temperature:	-10°C to +35°C (operation) -20°C to +70°C (storage).
Dimensions:	46x46x16mm.