Z-Wave Dimmer Switch by Duwi

This Z-wave dimmer switch is manufactured by Duwi and is intended to control lamps, both with resistive or inductive load. A pattress box is needed for installation.The lights can be operated from a Z-wave controller or manually by the paddle operated switch. The unit is designed for use within a 2-wire system, which means that no neutral wire (blue) is needed for it to operate. It can be included and controlled in a Z-Wave network from a remote control, a wireless control centre or any other kind of Z-Wave controller including using PC-software.The device is a conventional leading-edge phase control dimmer with support for inductive loads such as transformers. Additionally conventional resistive loads such as incandescent lamps or 230 V halogen lamps can be dimmed as well.

Technical specification

• Power rating: 230V, 50 Hz
• Wiring: 2-wire-system
• Maximum loads:
  • Incandescent lamps: 40...300W
  • 230V (HV) halogen: 40 ... 300W
  • Low voltage halogen with standard transformer (inductive load): 30...300VA
  • Low voltage halogen with switched power supply (reactive load): no
  • Fluorescent light: 30… 300VA, only dimmable lamps
• Wireless behaviour: receiver
• Z-Wave type: slave
• Installation: in pattress box
• Distance:  up to 30 m in buildings
• Display: Multicolour-LED
• Interaction: two buttons to be completed with switching paddle for local operation
• Power supply: via 230 V power
• Dimensions: 48mmx48mmx23mm

 For User guide Click here