X10 Transceiver Module - TM13I - Italian Plug (Type L)

Features

• Converts radio signals from Remote Controls, Wireless Switches and Wireless Sensors to X-10 Powerline signals over the mains.
• Comes with a built-in Appliance Module (220V, 5A).
• Italian plug type (Type L)

You may also me interested in the trailing lead version of this product Click here for details

Applications

The TM13 Transceiver Module is the central receiver necessary when using Remote Controls, Wireless Switches and Wireless Sensors. The TM13 Transceiver converts the signals from these devices to the X-10 Protocol on the mains, so that all X-10 Modules can be controlled via the mains.

The Transceiver Module contains a selector switch for the House Code. The House code of the TM13, the modules and remote controls have to be set to the same letter code to be able to control up to 16 X-10 modules.

Position “P” will transmit all house codes

The built-in Appliance Module can be switched with a command via a wireless controller, such as a Handheld Remote Control, or via the mains using the X-10 protocol. The built-in Appliance Module always responds to Unit Code 1.

The Transceiver Module has a plug and switched socket and can be connected without extra wiring.

Technical Specifications

Power: 230V +10% -15%, 50Hz
Supply current: <20mA capacitive
Switching capacity:
#300W/230V for light bulbs
#Low-voltage halogen lamps with a 500W/230V transformer for inductive / capacitive loads
#1200 W/230V for linear loads
RF Receiver Frequency: 433.92MHz
Marmitek X-10 Power Line: 120kHz +/-2kHz, 3.5Vpp
Signal Sensitivity: 15mVpp min., 50mVpp max. at 120kHz
Input Impedance: >180_ (L-N) at f=120kHz
Ambient Temperature: 0°C to 50°C (operating), -20°C to 70°C (storage)
Dimensions: 52x122x33mm (wxhxl excl. plug)

This product is CE approved for use in the EU.