Description of the Two Load Z-Wave Appliance Micro Module by Qubino

This extremely small micro module by Qubino is designed to be mounted behind a switch and can switch 2 separate loads like lights or appliances like fans, oven, washing machine, power socket etc. It also provides power consumption of the connected loads. Control can be achieved locally by use of a switch or by using a Z-Wave network controller.

This module requires a Live and Neutral supply.

Features

• Switch 2 resistive loads up to 920W each
• Power reporting in watts
• Small size to fit behind an existing switch
• Low power consumption
• Can operate and control 24VDC

Technical specifications:

Power supply: 110 - 230 VAC ±10% 50/60Hz, 24-30VDC
Rated load current of AC output (resistive load)*: 2 X 4A / 230VAC
Rated load current of DC output (resistive load): 2 X 4A / 30VDC
Output circuit power of AC output (resistive load): 2 X 920W (230VAC)
Output circuit power of DC output (resistive load): 2 X 96W (24VDC)
Power measurement accuracy: P=0-200W, +/-2W, P>200W, +/-3%
Digital temperature sensor range (sensor must be ordered separately): -50 ~ +125°C
Operation temperature: -10 ~ +40°C
Distance: up to 30 m indoors (depending on building materials)
Dimensions (W x H x D): 41,8 x 36,8 x 16,9mm
Weight: 28g
Electricity consumption: 0,4W
For installation in boxes: Ø ≥ 60mm or 2M
Switching: Relay (2x)
*In case of load other than resistive, pay attention to the value of cos φ and if necessary apply load lower than the rated load. Max current for cos φ=0,4 is 2A at 250VAC, 3A at 24VDC.

Product Manual

The product manual can be downloaded here.