Z Wave Flood Sensor by Everspring

The Z Wave Flood Sensor by Everspring can detect when there are leaks or flooding and send an alarm to Z-Wave controller which in turn can control other Z-Wave enabled devices such as pumps, valves etc.,

The Flood Detector consists of a transceiver, flood sensor and 3-meter flood sensor
cable. Protect your property from water damage! The Flood Detector is designed to
sense the presence of water in basements, yachts and many others residential and
commercial applications, providing early warning of developing floods. The Flood
Detector is designed so that the transceiver is mounted on the wall and the flood
sensor is placed in a location where water presence, such as a result of leakage or
flooding, is probable. Upon flood detection, the Detector will beep and flash and
report its status to the node ID. Once water is released, it will report to the node ID
as well.

The Flood Detector is powered by 3 x AA 1.5V alkaline battery. When battery level
drops below unacceptable level, the Detector flashes red LED once every 30 seconds
and reports low battery status to the node ID. When this occurs, the batteries should
be replaced as soon as possible.

Technical Spec.

• Wireless behaviour: transmitter
• Z-Wave type: slave
• Distance: up to 30m in buildings
• Local interaction: one button for network operations
• Power    supply: 3 x AA  batteries
• Dimensions: 85x85x41 mm (HxWxD)
• Weight: 185g

Further information:

To download the manual for Z-Wave Flood Sensor by Everspring Click here