This Z-Wave Micromodule by Fibaro allows you to control your lights locally using a standard switch or a momentary switch of your own choosing or remotely with a Z-wave controller. It is suitable for a 2 or 3 wire system, a neutral feed is not required.

A Z-Wave controlled light dimming module, designed to work with light sources of many types. May be connected to two-wire or three-wire switch feed. The  Fibaro Dimmer can switch or dim connected light sources either through a Z-Wave controller or through the wall switch connected directly to it. Automatically senses connected device, features automatic overload protection switch-off and soft start function. Works as a dimmer or as a connector, with two-wire or three-wire cables.

Specification

• As a dimmer, works with incandescent bulbs, 230V operated halogen lamps, 12V operated halogen lamps and dimmable LED lamps
• Using Bypass FGB001, with any dimmable light source up to 500W.
• Power source 230V +/-10%, 50Hz,
• Output power 25-500W (resistive loads only) in case of loads other than resistive, current must not exceed 1.8A,
• Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use),
• Surge protection: 2,5A,
• Overheating protection: safety off at 105oC,
• Ambient temperature: 10oC - 40oC,
• To be mounted in standard wall switch boxes (47mm back box depth recommended) with a momentary switch mounted in front,
• Radio protocol: Z-Wave, Radio Frequency 868 MHz,
• Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside (depends on building structure)
• Outside dimensions (L x W x H) 42mm x 36mm x 15mm.

Product Instructions

A copy of the product instructions for the Z-Wave Dimming Micro Module by Fibaro can be downloaded here.