The Z-Wave Appliance Micro Module by Fibaro is designed to be placed into a pattress box behind a normal switch and is capable of switching  2 loads up to 1.5Kw. This switch is no longer controlling the electrical load directly but acts as input device for the micro module. It has an internal relay to control the electrical load attached. With this micro module an existing installation can be turned into a Z-Wave enabled smart system keeping the original switches in place. This is particularly useful if you are using switches of a particular pattern and don't what to change them.

Technical specification:

• Power Source 110 V … 230 V, 50..60 Hz
• Max. AC output: 2 x 8 A/ 230 V
• Max. DC output: 2 x 8 A/ 30 V
• Max. Power load 2 x 1.5 KW as resistive load ( in case of loads other than resistive it may be necessary to connect lower output in order to protect the Switch from damage)
• Conforms to UE requlations: EN55022 (radio wave interference), EN61000-6 (safety of use),
• Overheating protection: safety off at 105 °C
• Ambient temperature: 0 - 40 °C
• To be mounted in standard wall switch boxes 47mm,
• Radio protocol: Z-Wave,
• Radio Frequency 868 MHz,
• Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside (depends on building structure),
• Outside dimmensions (L x W x H) 42mm x 36mm x 15mm.

Product Instructions

A copy of the product instructions can be downloaded here.