Z Wave 4 Button Touch Panel Switch by MCO Home

Features of the Z-Wave 4 Button Touch Panel Switch

• Stylish glass finished white switch with blue LED light indication when switched on
• Can switch 4 separate loads up to 1100w
• Fits a standard UK pattress box (a deep back box is required as a minimum depth of 32mm is required)
• It can be used to control 4 directly associated groups of devices or scenes stored in your controller
• A neutral wire is required for this switch

Specification

• EU: 220V 50Hz input, 3A max output (each channel)
• 1 Year Warranty

Usage

INCLUDING the Touch Panel Switch into your network

1. Put the controller into INCLUSION mode. Follow the instructions provided by the controller manufacturer.
2. Press and hold any key on the panel for 3 seconds.
Note: If inclusion is successful, all INDICATION LEDs on the panel will light up, and all switches will turn on.

EXCLUDING the Touch Panel Switch from your network

1. Put the controller into EXCLUSION mode. Follow the instructions provided by the controller manufacturer.
2. Press and hold any key on the panel for 3 seconds. Note: If the exclusion is successful, all INDICATION LEDs on the panel will go out, and all switches will turn off. The exclusion will delete all association data.