The Marmitek X10 Two Wire Two Load Lamp Dimmer Micro Module LMM21 is an extremely small X10 module (43.25mm x 47 mm x 21mm) which can be fitted behind an existing double wall switch to control 2 sets of lights. The lights connected to the MicroModule can be controlled by a X10 signal or by the double (2 gang) switch in the normal way. The benefit of this Micromodule is that it only requires 2 wires to each side of the switch and it can be connected to a normal double light switch.

Features:

• Suitable for 230V standard bulbs and (Eco) halogen lighting.
• Remote control via the mains using Marmitek X-10 Commands and with one or more standard or momentary switches. 
• Switches and dims lighting circuits up to 300W. 
• Can be used in combination with ‘designer’ switching material. 
• Soft start and smooth dimming features, remembers the last dim setting. 
• Makes your X-10 system invisible.
• No extra wires required for installation, works with a 2 wire switch.
• Dimmer (60W - 300W).
• Can be regulated from 0% lighting to the desired dim setting.
• Transforms your existing switch into a X-10 controllable switch.
• Transforms a double momentary action switch or standard double light switch into an X-10 controllable switch.
• Control 2 independant loads
• The module is not suitable for dimming and controlling low energy light bulbs and tube lighting. An Appliance module AMM32 should be used for these devices

Technical Data

Further Information

For more information on the Marmitek X10 Two Wire Two Load Lamp Dimmer Micro Module LMM22 Click here