Features

• Prevents noise from power supplies or motors entering the electrical system.
• Plugs into any 240V outlet.

Use this module in between 'noisy' electrical items and your wall socket to reduce the amount of signal noise that is fed into the powerline.

By using these modules you can improve the reliability of your X10 setup.
If you find that you are getting lights/appliances switching on and off at random then this is what you need.

Details

The transmission of high frequency signals via the mains network (such as those used to carry X10) can be affected by active or passive interference. When used correctly, the plug-in filter will extensively suppress any interference from a poor quality power supply or motor.

Typical active interference sources are appliances that do not dispose of a regular interference suppression according to the norm. Normally, interference generated within the house network is without significance as the special dynamic filtering techniques of the X10 system ensure undisturbed performance. However, with a particularly bad device, just plug in the filter and the interference is isolated.

Technical Specifications

Dimensions: Length 13, Width 5, Height 4 cm

Supply voltage: 240V+10%-15% 50Hz
Maximum current: 16A
Impedance: 14dB
EMC emission: according to EN50081-1
EMC immunity: according to EN50082-1
Electrical safety: according to EN60950 and EN60065
Ambient temperatures: -10ºC to +40ºC(operation)
-20ºC to +70ºC(storage)

This product is CE approved for use in the EU.