Features
The WCU330EU is a stylish control keypad for the Opus 300 (Octopus) Multi-Room Entertainment System. Working on the A-BUS standard, installation is extremely simple with just one Cat5 UTP or Cat6 cable connection needed to the hub and standard speaker cable to the loudspeakers. Remarkably, amplification for the speakers is built into the WCU330EU and a pre-amp output is even provided for driving external amplifiers or a powered sub-woofer if required.
To suit the needs of your home and each room, the fascia style may be changed by removing the "Easy-clip" faceplate, and replacing it with one of the many styles and finishes commonly available from MK and others. A white faceplate with no visible fixings is supplied.
- Easy to use
- Built-in amplification and pre-amp output
- Clean and simple keypad interface provides easy control
- Full control of Volume, Bass, Treble, Balance, Fader, Input Change and All-Off
- Fully A-BUS compatible
- Powered by Cat5 or Cat6 cable to MCU. No external power supply needed
- Built-in pre-amp output for powering external power amps
- Direct connection to ceiling or wall-mounted speakers
- Uses standard "Easy-clip" faceplates (full range of styles and finishes commonly available)
- Supplied complete with standard white faceplate
Technical Specifications
Dynamic Power Output: 15 Watts rms, 4 Ohms
Frequency Response: 20Hz - 20kHz
Volume Control Range: -80dB 32 steps
Bass Control Range: +/- 16dB 2dB steps
Treble Control Range: +/- 16dB 2dB steps
Balance Control Range: +/- 40dB 9 steps both ways
IR Pass-through: 34 - 40kHz and 54 - 58kHz modulation
Power: powered from MCU via Cat5 or Cat6 cable
Size (w x h): 84mm x 84mm - fits into standard 47mm back-box
More Information / Manuals
A user guide that gives a brief overview of the Opus 300 system and an installation guide that gives full wiring details and project planning considerations are available to download.
Click here for the User Guide - 225Kb
Click here for the Installation Guide - 444Kb
|
