Applications
The Marmitek TM13 Transceiver Module is the central receiver necessary when using Remote
Controls, Wireless Switches and Wireless Sensors. The TM13 Transceiver converts
the signals from these devices to the X-10 Protocol on the mains, so that all
X-10 Modules can be controlled via the mains.
The Transceiver Module contains a selector switch for the House Code. The HouseCode
of the TM13, the modules and remote controls have to be set to the same letter
code to be able to control up to 16 X-10 modules.
Position “P”
will transmit all house codes
The built-in Appliance Module can be switched
with a command via a wireless controller, such as a Handheld Remote Control,
or via the mains using the X-10 protocol. The built-in Appliance Module always
responds to Unit Code 1.When the Transceiver Module is combined with the CM11
Computer interface, the TM13 functions as a ‘gateway’ to transmit
signals from remote controls and other devices to the CM11.
Using the TM13,
any macros stored in the CM11 Computer Interface can be activated using a wireless
remote control and all X-10 addresses can be controlled (max. 256 modules).
The Transceiver Module has a plug and switched socket and can be connected without
extra wiring.
Reading the status of the TM13 is possible with the use of the
CM11 Computer Interface.
