The X10 lamp module (LM12U) is a 300W receiver unit that can work as a remote dimmer. The connected lamp can still be switched on and off locally. The dimmer function, however, requires an X10 remote control like the KR22E Keyfob Remote. The dimmer module can be used at any wall sockets in the house with incandescent lamps between 40W and 300W.
Please note that the Lamp Module is only for use with lamps and is not suitable for appliances or Energy saving bulbs.
As the X10 dimmer is simply inserted into wall sockets like an ordinary plug, there is no installation to be carried out. Just set the wheels on the front to the desired device address.
The lamp connected to the dimmer module can still be controlled locally by its own switch, but dont forget to leave the local switch in the "ON" position, as otherwise the lamp cannot be controlled by an X10 controller. Switch the lamp off by remote control. The unit responds to "standard" X10 commands. ie. All-Lights-On, All-Units-Off, On, Off, Bright and Dim.
Dimensions: Length 120mm, Width 52mm, Height 41mm
This product is CE approved for use in the EU.
Supply voltage: 230V +-10% 50Hz Supply current: =< 20mA capacitive Making capacity: 40W to 300W (incandescent lamp only) Signal sensitivity: 15mVpp min 50mVpp max at 120KHz Input impedance: => 55 Ohms (L-N) at 120KHz Ambient temperature: -10C to +40C (operation); -20C to +70C (storage)
