Fibaro CO Detector - Z-Wave Carbon Monoxide Detector

The Fibaro CO sensor is a Z-Wave Plus carbon monoxide detector for your smart-home.

This EN 50291-1:2010 certified carbon monoxide sensor (certified by a BSI Group accredited testing laboratory) offers an exceptional level of measurement precision. It is able to detect even slightly increased amounts of carbon monoxide, which are enough to affect your well-being over time. If higher concentrations are detected, the FIBARO CO Sensor will immediately inform you about the threat by sounding a loud 85dB siren and flashing a light on the device. Should your Z-Wave network fail, the sensor will continue to operate independently, offering you full protection against carbon monoxide poisoning.

The Fibaro CO sensor also has a temperature measurement functionality which reports back to your Z-Wave controller.

Key Features

• compatible with any Z-Wave or Z-Wave+ Controller
• supports protected mode (Z-Wave network security mode) with AES-128 encryption
• wall-mounted
• battery-powered
• completely wireless
• alarm signalled with a built-in siren and LED diode
• built-in temperature sensor

Specifications

• Radio protocol: Z-Wave (500 series chip)
• Radio frequency: 868.4 MHz EU
• Power supply: CR123A battery, 3.0V DC
• Lifespan under typical conditions: 8 years
• CO concentration measurement range: 0 – 450 ppm
• Measuring accuracy: ±10ppm / ±5%
• Operating temperature: 0 – 50°C
• Operating humidity: 10-95%RH without condensation
• Alarm siren sound level: 85 dBA at 3 meters (10 feet)
• Alarm response times on default settings: 50ppm 60-90min; 100ppm 10-40min; 300ppm <1.5min
• EU directives compliance: RED 2014/53/EU; RoHS 2011/65/EU; EN 50291-1:2010
• Range: up to 50m outdoors; up to 40m indoors (depending on terrain and building structure)
• Dimensions (diameter x height): 65 x 28 mm