UK-Automation provides solutions to security with a range of branded alarms that can be used inside and outside of the home. One of the most popular items is the Marmitek X10 Motion Detector PIR. When this senses movement, it sends wireless X10 signals to an X10 receiver. This receiver can also perform alternative functions such as controlling on/off light and appliance switches. The benefits of the system are:
- Saving energy by turning off lights when a room is unoccupied
- No need for lighting wall switches.
- Activating lighting sequences
- Suitable for indoor and outdoor use
- Protecting and warning of visitors.
When used in conjunction with a Marmitek CM15pro Computer Interface and ActiveHomePro software, macros can be set up to run when the MS13E senses occupancy. Sequenced lighting is possible with the CM15pro time delay. The system works by sending wireless radio frequency (RF) signals to a transceiver module, which then passes the signal to the house wiring. Other X10 controlled modules, such as the lamp or appliance modules can then turn on lights or appliances. The MS13E also has a built-in photocell that detects when it is dark. The field of view is approximately 110 degrees on the horizontal axis and 125 degrees vertically with a PIR Range: 45 degrees - 5 metres, straight ahead - 12 metres.
Alarm chimes
Another popular product in the security alarm range is the Doorway Beam Sensor Alarm or Chime designed to sound a user selectable chime or alarm when someone walks through an invisible infra-red light beam. This beam is projected from an emitter and bounced off a reflector placed at the other side of the detection area. When the infrared beam is broken by any presence in the path of the infrared beam, it is spotted by a sensor built into the emitter detects. A chime or alarm can be set via the included separate speaker annunciator to notify of a security alert.
Finally there is the Hydra Control Freak Proactive Security System which is currently on special offer with a saving of £149 over the RRP. This is an advanced security system which informs a homeowner via text or email when a PIR is triggered. This enables the homeowner to monitor the video captured by the camera via a smart phone at the point that the PIR was activated. The HCF can be used to control X10 devices, and can be activated to switch on lights, sirens or alarms. It can schedule events on a timed weekly or daily basis. All of these and many other alarms can be found on the UK-Automation website, allowing you, the homeowner peace of mind about the security of your property.