Marmitek EasyTouch Panel10
[ETP10 / 09832]

• Operate all your lights and appliances, wirelessly with the touch of a finger
• 10"/25 cm touch screen for operating all your X-10 modules.
• Make it easier for everyone to operate all your X10 modules
• Fully wireless and easily mounted into or onto the wall.
• Choose the design that suits your interior perfectly!
• You can use your own text, image or photo on the panel and set the location and function of the touch screen buttons yourself.
• Start today with X-10 Home Automation or fit this panel into your existing X-10 system.
• Easy to use and works without a PC.

• Set up the size and position of buttons on the screen to suit your own requirements
• Buttons can be configured to control the modules you want
• You can set buttons to run a macro allowing you to run a series of events from one press
• All units OFF/ON, All lights OFF/ON, DIM and BRIGHT functions available
• Design your own style of background or use one of the standard ones which are provided
• Ideal for setting mode lighting or controlling zones within your house

An Installation Guide for this product is available:

Click here to read the Marmitek EasyTouch Panel10 installation guide - 325Kb

Touch screen and frame:
Power: 2 x AAA batteries
Material frame: Brushed aluminium
Photo size: 218x165mm
Visible photo size: 210x154mm
Dimensions: 260x205x20mm
Transmitter:
Transmitter: Incorporated Marmitek X-10/RF transmitter
Antenna: Integrated antenna
Range: Up to 30 free field, up to 20m through floors and walls
Protocol: Marmitek X-10 RF protocol
Controller:
Number of configurations: Maximum 2
Number of buttons: Maximum 30 per configuration
Button size: Small (15x15mm)
Medium (25x15mm)
Big (25x25mm)
Minimum room between buttons: 4mm
Screen resolution: 255x255 points
X resolution 0.9mm
Y resolution 0.7mm
Memory: Settings are saved after loss of power
Functions: Set house/unit code, Unit ON, Unit OFF, ON, CHANGE (toggle),
ALL UNITS OFF, ALL LIGHTING ON DIM+, DIM-
3 macros each with 4 functions
2 memories for buttons and settings
a. Mem 1: with factory settings
b. Mem 2: empty
Factory reset
Ambient temperature: -10º ~ +60º C (in operation)

Set up & installation

Q: Am I able to increase the range of my remotes by using more Transceivers?

A: Yes, you can use more than one TM13 Transceiver in your home when the range of your remotes is not sufficient. The TM13 is using so called collision detection to prevent signals to be disturbed when more than one TM13 is transmitting. TM13’s will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the TM13 units are placed as far away from each other as possible.

Q: I cannot find the selections ‘ALL LIGHTS ON’, ‘ALL LIGHTS OFF’, ‘ALL UNITS OFF’, ‘DIM UP’ and ‘DIM DOWN’.

A: These functions are not bound to a unit code. If you wish to programme these functions, browse through the unit codes (1...16). You will find the above functions after unit code 16.